Chiang Mai Journal of Science

Print ISSN: 0125-2526 | eISSN : 2465-3845

1,647
Articles
Q3 0.80
Impact Factor
Q3 1.3
CiteScore
7 days
Avg. First Decision

Model-free Kinetic Analysis of Thermal Degradation of Polystyrene and High-Density Polyethylene Blends

Kasawat Tippaha, Nichaphat Jittangkoon and Parimanan Cherntongchai*
* Author for corresponding; e-mail address: parimanan@gmail.com
Volume: Vol.43 No.2 (SPECIAL ISSUE 1)
Research Article
DOI:
Received: 15 September 2015, Revised: -, Accepted: 10 December 2015, Published: -

Citation: Tippaha K., Jittangkoon N. and Cherntongchai P., Model-free Kinetic Analysis of Thermal Degradation of Polystyrene and High-Density Polyethylene Blends , Chiang Mai Journal of Science, 2016; 43(2): 296-305.

Abstract

 An objective of this work was to investigate kinetic information of a thermal degradation of polystyrene (PS) and high-density polyethylene (HDPE) blends under a pyrolysis atmosphere at different mixture compositions, using thermogravimetric analysis, operated non-isothermally, and model-free method. It was found that the degradation temperature range can be reduced by an addition of PS. This is probably due to an attack of PE by polystyryl radicals. With regard to an activation energy calculation based on model-free method, the activation energies of the thermal degradation tended to increase with a level of conversion, for all cases. The lower the level of conversion, the closer the activation energy value to that of 100%PS. With higher level of conversion, the activation energy values were approaching to that of 100% HDPE. This could be due to the fact that the polystyryl free radical from PS is diminished along the conversion path and, hence, at a higher level of conversion, the degradation process has no more influence of such free radical. Finally, the activation energy of single PS  was lower than that of single HDPE and a proportion of PS to HDPE has no effect on the activation energy, but the level of conversion.  

Keywords: thermal degradation, polystyrene, high-density polyethylene, model-free
Outline
Figures