Chiang Mai Journal of Science

Print ISSN: 0125-2526 | eISSN : 2465-3845

1,647
Articles
Q3 0.80
Impact Factor
Q3 1.3
CiteScore
7 days
Avg. First Decision

Performance of Shear Wave Speed Measurements by Using Reverberant Optical Coherence Elastography

Nirawit Kunanta, Fernando Zvietcovich, Kevin J. Parker, Jannick P. Rolland and Panomsak Meemon
* Author for corresponding; e-mail address: panomsak@g.sut.ac.th
Volume: Vol.49 No.1 (Special Issue I : Jan 2022)
Research Article
DOI: https://doi.org/10.12982/CMJS.2022.007
Received: 28 April 2021, Revised: 12 July 2021, Accepted: 12 July 2021, Published: -

Citation: Kunanta N., Zvietcovich F., Parker K.J., Rolland J.P. and Meemon P., Performance of Shear Wave Speed Measurements by Using Reverberant Optical Coherence Elastography, Chiang Mai Journal of Science, 2022; 49(1): e2022007. DOI 10.12982/CMJS.2022.007.

Abstract

      Elasticity of biological tissue is important to understand its properties, which could play important role in medical diagnosis and treatment, especially in its early stage of pathology. Optical Coherence Elastography (OCE) has been intensively developed for mapping the elasticity contrast of various biological tissues. OCE techniques based on tracking of shear vibrational wave propagation is one of the most popular techniques. The high speed of shear wave propagation in biological media leads to challenges in both data acquisition and data processing. Recently, the concept of reverberant shear wave field has been applied to OCE, called Rev3D-OCE. In this work, we experimentally investigate the performance of Rev3D-OCE to differentiate gelatin phantoms with a slight difference of elasticity. We verified that Rev3D-OCE can differentiate different shear wave speeds associated with different concentrations of gelatin phantoms, where higher shear wave speed was observed in a higher concentration of the phantom as expected. The average shear wave speed of gelatin with 3 wt% and 4 wt% concentrations were measured as 1.3 ± 0.2 m/s and 1.5 ± 0.1 m/s with about 11% and 14% of errors as compared with that obtained by standard mechanical testing, respectively. In addition, the spatial resolution of Rev3D-OCE as determined from the edge response measurement at the boundary between two gelatins of 3 wt% and 4 wt% concentrations was measured to be 0.3 millimeters.

Keywords: shear wave speed, reverberant shear wave field, gelatin phantom, elasticity mapping, optical coherence elastography
Outline
Figures